Filters
No product filters applied.Full DC Inverter 3-Pipe Heat Recovery Systems
MRV 5-RC
The MRV 5-RC Outdoor Unit is a Full DC Inverter Unit with 3-pipe Heat Recovery Systems, allowing simultaneous Cooling and Heating. The unit offers flexible installation, with the ability to reverse the orientation of the series. The MRV 5-RC offers a wide range of powers: up to 22 HP with a single module and up to 88 HP combining up to 4 modules.Product Videos
Additional Information
The MRV 5 RC series offer simultaneous Heating and Cooling, available with 2 and 3-pipe heat recovery outdoor unit.
Technical Specifications | MRV 5-RC
Heat Pump VRF Continuous Heating System
MRV 5 H
The MRV 5-H Outdoor Unit offers a continuous Heating System, even during Defrost Mode. Indoor temperature fluctuations are reduced by using direct defrosting technology and ensuring that, in certain defrosting modes, the four-way valve does not reverse direction, offering uninterrupted heating temperatures. Highly efficient, the MRV 5-H gives a wide range of power: up to 26 HP with a single module and up to 104 HP by combining up to 4 modules. Modules 8 to 16 HP are equipped with a single fan, for maximum installation flexibility and a small footprint on the surface.Product Videos
Additional Information
Smart Control thanks to SMARTLINK” Wi-Fi Features
As an alternative to the classic digital communication cable, which is required to make all indoor units talk to their outdoor units, you can install these wireless radio accessories with ZigBee technology on each indoor and outdoor unit.
At the time of activation, the indoor units begin to dialog with each other creating a stable network of coded signals that bounce between the various internal units until they reach the outdoor unit and vice versa. Each indoor unit works as a signal repeater. With this system, communication is guaranteed even to the most distant indoor unit, and in the presence of walls or other obstacles.
When an indoor unit is in maintenance, the signal of the unit is lost, this does not affect the normal functioning of the other units.
The system is set up by the Haier service centres in the start-up phase through a special application (APP) that can be installed on smartphones or tablets (it does not require access to the Internet, as it works on a local WIFI network
Technical Specifications | MRV 5 H
Outdoor Units with Front Air Discharge
MRV S II
The MRV S II Outdoor Unit is a DC Inverter Unit with Front Discharge. The unit, suitable for flexible applications with bigger outdoor capacity options, has a large aerodynamic fan diameter and a high-efficiency condenser. It is packed with premium features such as the Self-Clean function, a Low Noise Level with automatic sound reduction capability, and a Twin Rotary DC Inverter Compressor. The MRV S II offers a wide power range: up to 12 HP with a single module.Product Videos
Additional Information
Technical Specifications | MRV S II
ES15V - Electric Water Heater
.png?itok=1240213045)
.png?itok=734456298)
_0.png?itok=1993758653)
ES15V - Electric Water Heater
The compact and flat electric water heater, coming in a 15L capacity, offers flexible installation. It can be installed in small spaces, either over-tank or under-tank. Thanks to its unique U-type water inlet method, no water will remain unused at the bottom of the tank. It is shockproof and made of durable materials, increasing the unit's lifetime.Product Videos
Additional Information
Technical Specifications | ES15V - Electric Water Heater
VH3 - Electric Water Heater
VH3 - Electric Water Heater
Coming in a round vertical design, this Electric Water Heater uses anti-corrosion materials for better product durability. Coming in 2 different sizes (47L and 75L) this Round Vertical Electric Water Heater can cater to a wide range of needs and can heat the water up to 55°C.Product Videos
Additional Information
Technical Specifications | VH3 - Electric Water Heater
A3 - Electric Water Heater
A3 - Electric Water Heater
Coming in a round vertical design, the Electric Water Heater is shockproof and uses anti-corrosion materials for better product durability. Coming in 4 different sizes (30L, 50L, 80L and 100L) the Round Vertical Electric Water Heater can cater to a variety of different needs.Product Videos
Additional Information
Technical Specifications | A3 - Electric Water Heater
TF7 - Electric Water Heater
TF7 - Electric Water Heater
The square small version of the Electric Water Heater offers a high level of comfort. It can heat the water up to 55°C and is available in two sizes: 47L and 75L. Two additional sizes are being added to the range, offering new capacities of 30L and 100L.Product Videos
Additional Information
Technical Specifications | TF7 - Electric Water Heater
ES10V - Electric Water Heater
ES10V - Electric Water Heater
The compact and flat electric water heater, coming in a 10L capacity, offers flexible installation. It can be installed in small spaces, either over-tank or under-tank. Thanks to its unique U-type water inlet method, no water will remain unused at the bottom of the tank. It is shockproof and made of durable materials, increasing the unit's lifetime.Product Videos
Additional Information
Technical Specifications | ES10V - Electric Water Heater
R134A - S1 Split - HPWH
R134A - S1 Split - HPWH
The Haier S1 Heat Pump Water Heater Multi Split is a good option to replace an old water heater. Offering an energy efficiency rating of A+, the S1 HPWH Split has large capacity hot water storage with 195L and 293L capacities. The Micro-Channel Condenser ensures high performance of the unit. Both versions of the S1 HPWH split comes with two independent units that forms a kit: TS200HE-S1 + UE1.0-S1 and TS300HE-S1 + UE1.5-S1.Product Videos
Additional Information
Designed to offer flexibility
The S1 HPWH, equipped with Micro Channel Condenser ensures an increased thermal efficiency. Its powerful compressors contribute to shorter heating up time, ensuring comfort at any time.
Under Eco mode, water is heated by heat pump exclusively to maximize efficiency and economy. On top of that, the unit monitors the operating temperature through multi-touch sensors and performs intelligent defrost on demand, to prevents invalid operations, leading to a more effective and energy saving defrost.
Technical Specifications | R134A - S1 Split - HPWH
R134A - M3 - HPWH
R134A - M3 - HPWH
The Haier M3 Heat Pump Water Heater Monobloc provides hot water using the heat in the air, reducing energy consumption and offering an A+ energy range. The M3 comes in 3 different tank versions: 195L, 246L and 240L. Equipped with high-end technologies such as a Micro-channel Condenser, Fast Heating and eco-power modes, the M3 monobloc has a slim design, making it easy to install anywhere. If you are opting for a Photovoltaic panels installation, the M3 is a good option as it can be connected to this enrgy source.Product Videos
Additional Information
PV Connection
Our Heat Pump Water Heaters can be connected to your PV Installation. Thanks to its coil exchanger, the HP 250M 3C can be linked and connected with solar water heaters to generate backup power. This will help reduce the energy consumption and transition to a greener energy source.
